Walnut American

Light Systems

See your floor in a new light. A lighting system integrated into the floor brings out the best in any room with a unique lighting ambience. LED floor lights from ter Hürne will help your rooms to make such special statements. The installation of flat LED lights with surfaces made of safety glass allows you to position the lights anywhere in the room. The shock-resistant lights – either round or square – are cased in equally attractive stainless-steel housings and can easily withstand even heavy loads. The current consumption is extremely low and economical at 1.2 Watt. The colour interplay of the round lights can be selected using the various different films. They can be exchanged as you wish.
Incidentally, the LED lights are suitable for use with all floor products from ter Hürne.

LED floor light, stainless steel, round

• Delivered without a connection cable
• Stainless steel ring, illumination white. Incl. yellow, blue and transparent coloured films for individual designs
• Installation depth: 7 mm
• Installation diameter: 78 mm
• External dimension: Ø 85 mm

LED transformer, 10 W

For connecting max. 5 LED floor lights.

LED foot switch

For switching LED floor lights off and on easily.

LED extension cable

2 m or 10 m. For connecting the LED floor lights to the transformer.

LED power plug

For connecting the transformer to the electrical circuit.

Triple set of LED lights, stainless steel, square for floor, wall or ceiling

• Finely polished stainless steel
• 3 LED lights 12 V
• 1 LED electronic ballast with JST 5-way distributor
• 1 primary high-voltage connection 600 mm
• 3 JST extensions 5000 mm
• IP44 splash-proof
• Installation depth: 7 mm
• Installation diameter: 78 mm
• External dimension: 86 x 86 mm

other accessories

• LED primary high-voltage connection
• LED high-voltage extension

Skirtings

A perfect floor is the sum of several different details. The skirtings in particular add the finishing touch to the overall impression. ter Hürne supplies a comprehensive selection of skirtings in real-wood or decor designs to suit every decor. The variation of colours, shapes and wood types permits the ideal transition between the wall and the floor. Every floor can find its counterpart in a perfectly matching colour with a coordinated skirting from ter Hürne. The intelligent clip technology also makes the assembly particularly easy. Cables positioned behind become completely invisible. And, if necessary, the skirtings can easily be removed again.

Skirting SKL 20

Design: veneer / decor
Length: 2600 mm
Width: 22 mm
Height: 40 mm

Skirting SKL 50

Design: veneer / decor
Length: 2600 mm
Width: 22 mm
Height: 50 mm

Skirting SKL 60

Design: veneer / decor
Length: 2600 mm
Width: 20 mm
Height: 60 mm

Skirting SKL P1

Design: decor
Length: 2600 mm
Width: 18 mm
Height: 90 mm

Skirting SKL P2

Design: decor
Length: 2600 mm
Width: 18 mm
Height: 60 mm

Clips

Suitable for skirtings: SKL 20, SKL 50, SKL 60, SKL P2

Content: 30 clips, incl. dowels and screws for approx. 15 m skirtings

Skirting caps for SKL 20

ter Hürne end caps add an attractive final touch at door frames.

Material: Plastic

Inside corners for SKL 20

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Outside corners for SKL 20

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Skirting caps for SKL 50

ter Hürne end caps add an attractive final touch at door frames.

Material: Plastic

Inside corners for SKL 50

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Outside corners for SKL 50

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Skirting caps for SKL 60

ter Hürne end caps add an attractive final touch at door frames.

Material: Plastic

Inside corners for SKl 60

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Outside corners for SKL 60

Mitre cuts are not necessary and even small sawing mistakes are concealed thanks to the skirting caps for inside and outside corners.

Material: Plastic

Solid wood finishing profile

Application: used to round off your floors at outside doors and other edges.

Length: 2400 mm
Width: 35 mm
Height: 18 mm

Solid wood adapter profile

Application: To adapt the transition between two floors of different heights.

Length: 1000 / 2400 mm
Width: 45 mm
Height: 18 mm

Solid wood transition profile

Application: For transitions between floors of the same height, e.g. f for expansion joints in doorways.

Length: 1000 mm / 2400 mm
Width: 45 mm
Height: 19 mm

Transition profile, type 788

clip profile system Application: for floor thickness between 7 and 18 mm if they are the same height, for height adjustment up to 15 mm if they are different heights (floor thicknesses 5 – 22 mm)

Length: 900 mm / 2700 mm
Width: 38 mm

Adapter profile, type 786

clip profile system Application: for floor thickness between 3 and 23 mm, for height adjustment up to 16 mm if they are different heights (floor thicknesses from 0 – 23 mm)

Length: 900 mm / 2700 mm
Width: 51 mm

Finishing profile, type 787

clip profile system Application: for floor thicknesses between 7 and 18 mm

Length: 900 mm / 2700 mm
Width: 30 mm

Transition profile, type 488 A

Application: For transitions between floors of the same height, e.g. for expansion joints in doorways. Suitable for floors between 7 and 15 mm.

Length: 900 mm / 1000 mm* / 2700 mm
Width: 34 mm

* 14 days´delivery time

Flexible transition profile, type 888

Application:For transitions between floors of the same height. Suitable for floors of the same thickness, between 7 and 17 mm, height compensation up to 11 mm given different floor thicknesses (floor thicknesses from 3 – 23 mm)

Length: 900 mm / 1000 mm* / 2700 mm
Width: 22 mm

* 14 days´delivery time

Adapter profile, type 486 A

Application:To adapt the transition between two floors of different heights. Suitable for floor thicknesses between 7 and 15 mm.

Length: 900 mm / 1000 mm* / 2700 mm
Width: 44 mm

* 14 days´delivery time

Flexible adapter profile, type 886

Application: To adapt the transition between two floors of different heights. Suitable for floors between 7 and 23 mm.

Length: 900 mm / 2700 mm
Width: 51 mm

Finishing profile, type 487 A

Application: used to round off your floors at outside doors and other edges. Suitable for floor thicknesses between 7 and 15 mm

Length: 900 mm / 2700 mm
Width: 22 mm

Stair profile, type 320

Application: For steps/stairs. Suitable for floors between 7 and 16 mm.

Length: 900 mm / 2700 mm
Width: 22 mm

Base material

Just as subfloors and floors can all differ, so will the underlay material requirements also vary. Sound reduction, moisture protection and warm water underfloor heating system requirements all have an important influence.

AkusTec mat, 2 mm

For the best noise reduction for floors that are not lined against footfall sound. Ideally suited to use on warm water underfloor heating systems thanks to the low thermal resistance.

Impact sound insulation: 18 db
footfall sound insulation: 20 Sone

AkusTec mat, 3 mm

With a vapour barrier for the best noise reduction for floors that are not lined against footfall sound. Ideally suited to use on warm water underfloor heating systems thanks to the low thermal resistance. Aluminium sealing tape necessary for gluing the joints! (Note: aluminium lining must be positioned on top)

Impact sound insulation: 20 db
footfall sound insulation: 25 Sone

Aluminium sealing tape

Strictly necessary for sealing the adjacently installed sheets of the AkusTec mat. For sealing butt joints of PE film, the antiperforation film or the combi PE foamed film which are not protected with the self-adhesive strip.

Elastilon Basic

The Elastilon mat is used for floating installation of ter Hürne floors. Elastilon not only subdues footfall sound but also reduces the formation of open joints which typically occurs in solid wood floors during annual climatic changes with tensile fabric netting.

Elastilon Strong

The Elastilon mat is used for floating installation of ter Hürne floors. Elastilon not only subdues footfall sound but also reduces the formation of open joints which typically occurs in solid wood floors during annual climatic changes with tensile fabric netting. Elastilon Strong is strictly necessary for wood types that are highly prone to swelling, such as beech.

Combi PE foam/film, with aluminium lining

The ter Hürne combimat offers double protection in one step: footfall sound insulation and moisture protection. Just unroll joint to joint, pull off the adhesive strip, press it on and that’s it. The pre-manufactured overlap ensures maximum tightness between the individual sheets. Do not settle for less. The ter Hürne combimat is ideally suited for the operation of warm-water underfloor heating systems due to its extremely low thermal resistance, which enables short warm-up times.

Thickness: 3 mm PE foam incl. aluminium lining. 1060 mm width including 60 mm film overlapping with self-adhesive strips

Combi PE foam/film

The ter Hürne combimat offers double protection in one step: footfall sound insulation and moisture protection. Just unroll joint to joint, pull off the adhesive strip, press it on and that’s it. The pre-manufactured overlap ensures maximum tightness between the individual sheets. Do not settle for less. The ter Hürne combimat is ideally suited for the operation of warm-water underfloor heating systems due to its extremely low thermal resistance, which enables short warm-up times.

Thickness: 3 mm PE foam incl. aluminium lining. 1060 mm width including 200 mm film overlapping with self-adhesive strips.

PE film

Transparent, SD value ≥ 150 m as vapour barrier.

Installation insulating

Particularly suitable for installation on old planked floors. Outstanding reduction of impact and footfall sound. Compensates for unevenness of up to 3 mm .Not suited for installation on heated cement floors.

Board dimension: 800 x 625 mm
Impact sound insulation: 22 db
Footfall sound insulation: 15 sone

Spacer wedge

For ensuring the precise distance of the floor from the wall.

Professional installation iron

For inserting the last planks in each row.

Radiator pipe trims

Suitable for heating pipe diameters of 15, 18 and 22 mm. Colours coordinated with the inside/outside corners and the skirting caps.

Repair wax stick

For repairing minor damage, spatula included.

Adhesive D3

For gluing of the tongue-and-groove

Flexible filler

Different colours. For sealing expansion joints and doorways. Can be sanded, high/lasting elasticity, solvent-free, fast drying.

SikaBond T-54 FC adhesive

For gluing engineered parquet floors and solid wood planks. Suitable for all wood species. Coverage approx. 13 m²

Sika Grund P base coat

For subfloor preparation, as dust binder and wash primer on cement screed and concrete floors. Coverage approx. 30 sqm.

Sika Primer MB

Acts as a moisture barrier, subfloor hardening and also a coating on old glue residue and poured asphalt indoors.

Sika Remover

For cleaning badly soiled surfaces and removing glue residue.

Toothed spatula B11

For exact application of the SikaBond adhesive.

SikaLayer 03

System for gluing floors on dry screed. High quality PE foam mat with symmetrical openings for even distribution of the adhesive. Controls adhesive application. Simple and easy to install. Lies flush on the subfloor.

other Accessories

• Levelling compound Sika Level P
• SikaBond T-52 FC adhesive
• SikaBond dispenser
• SikaBond gun

Cleaner concentrate for UV oil-treated wood floors

For regular care and cleaning.

Cleaner concentrate for lacquered wood floors

For regular care, maintenance and cleaning of ter Hürne engineered parquet flooring.

Stain and adhesive remover for laminate and wood floors

Removes stain and glue residues.

Care polish for UV oil-treated wood floors

Cares for the surface. Cleans and protects, polishable and environmentally friendly.

Care polish for lacquered wood floors

Cares for the surface. Cleans and protects. Polishable and environmentally friendly.

Polish remover for lacquered and UV oil-treated wood floors

Removes polish residue.

Sealing lacquer for lacquered wood floors

Water based – approx. coverage 8 sqm. For lacquered engineered parquet flooring. Suitable for re-sealing engineered parquet flooring that has already been sealed at the factory.

Repair set

For repairing small damaged areas on lacquered floors. Contents: Bottle of lacquer, sponge and brush.

Maintenance tissue

Soft fleece cloths for spot cleaning and working with the hard oil finish.

Felt gliders, self-adhesive

For stationary furniture, to protect any wooden floor.

Felt gliders, screw-on

For mobile furniture, to protect any wooden floor.