ter Hürne - unique as life itself
             

Base material

Just as subfloors and floors can all differ, so will the underlay material requirements also vary. Sound reduction, moisture protection and warm water underfloor heating system requirements all have an important influence.

 





AkusTec mat, 2 mm

For the best noise reduction for floors that are not lined against footfall sound. Ideally suited to use on warm water underfloor heating systems thanks to the low thermal resistance.

Impact sound insulation: 18 db
footfall sound insulation: 20 Sone

 





AkusTec mat, 3 mm

With a vapour barrier for the best noise reduction for floors that are not lined against footfall sound. Ideally suited to use on warm water underfloor heating systems thanks to the low thermal resistance. Aluminium sealing tape necessary for gluing the joints! (Note: aluminium lining must be positioned on top)

Impact sound insulation: 20 db
footfall sound insulation: 25 Sone

 





Aluminium sealing tape

Strictly necessary for sealing the adjacently installed sheets of the AkusTec mat. For sealing butt joints of PE film, the antiperforation film or the combi PE foamed film which are not protected with the self-adhesive strip.

 





Elastilon Basic

The Elastilon mat is used for floating installation of ter Hürne floors. Elastilon not only subdues footfall sound but also reduces the formation of open joints which typically occurs in solid wood floors during annual climatic changes with tensile fabric netting.

 





Elastilon Strong

The Elastilon mat is used for floating installation of ter Hürne floors. Elastilon not only subdues footfall sound but also reduces the formation of open joints which typically occurs in solid wood floors during annual climatic changes with tensile fabric netting. Elastilon Strong is strictly necessary for wood types that are highly prone to swelling, such as beech.

 





Combi PE foam/film, with aluminium lining

The ter Hürne combimat offers double protection in one step: footfall sound insulation and moisture protection. Just unroll joint to joint, pull off the adhesive strip, press it on and that’s it. The pre-manufactured overlap ensures maximum tightness between the individual sheets. Do not settle for less. The ter Hürne combimat is ideally suited for the operation of warm-water underfloor heating systems due to its extremely low thermal resistance, which enables short warm-up times.

Thickness: 3 mm PE foam incl. aluminium lining. 1060 mm width including 60 mm film overlapping with self-adhesive strips

 





Combi PE foam/film

The ter Hürne combimat offers double protection in one step: footfall sound insulation and moisture protection. Just unroll joint to joint, pull off the adhesive strip, press it on and that’s it. The pre-manufactured overlap ensures maximum tightness between the individual sheets. Do not settle for less. The ter Hürne combimat is ideally suited for the operation of warm-water underfloor heating systems due to its extremely low thermal resistance, which enables short warm-up times.

Thickness: 3 mm PE foam incl. aluminium lining. 1060 mm width including 200 mm film overlapping with self-adhesive strips.

 





PE film

Transparent, SD value ≥ 150 m as vapour barrier.

 





Installation insulating

Particularly suitable for installation on old planked floors. Outstanding reduction of impact and footfall sound. Compensates for unevenness of up to 3 mm .Not suited for installation on heated cement floors.

Board dimension: 800 x 625 mm
Impact sound insulation: 22 db
Footfall sound insulation: 15 sone